bing tracking image

Nissan Trailer Hitch Ball Mount Installation And Review Videos

  

B and W Ball Mounts Review - 2016 Nissan Frontier- Video

B and W  Ball Mounts Review - 2016 Nissan Frontier

Today on our 2016 Nissan Frontier, we'll be doing a test fit of the B&W Tow and Stow 3 ball mount for 2 inch hitches. This has a 9 inch drop and a 9.5 inch rise. It's rated at 10000 pounds. The part number is BWTS10050B. We've already got our ball mount installed, as you can see. Going to go ahead and go over a few measurements with you with here, so you can keep that in mind. From the center of the hitch pin hole on our Frontier to the edge of where our ball mount sits, we have about 10.5 inches. more


Watch Video

3/1/2016 1:26:33 PM



B and W Ball Mounts Review - 2016 Nissan Frontier BWTS10049B- Video

B and W  Ball Mounts Review - 2016 Nissan Frontier BWTS10049B

Today on our 2016 Nissan Frontier we will be test fitting the B&W tow and stow 3-ball mount for 2-inch hitches. It has a 7-inch drop and a 7 1/2-inch rise. It is rated at 10,000 pounds. The part number is BWTS10049B. Now we have got out ball mount installed here already on the Frontier. We have got it installed using a pen and clip which is available on our website. more


Watch Video

3/1/2016 1:26:16 PM



Draw-Tite Ball Mount Review - 2013 Nissan Frontier- Video

Draw-Tite Ball Mount Review - 2013 Nissan Frontier

Today on our 2013 Nissan Frontier we'll be test fitting the Draw-Tite Ball Mount for the 3/4" rise or 2" drop rated at 7500 pounds, part number 2923. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17-1/4". Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll now go ahead and slide shank of the ball mount in the drop position into the opening of the hitch and secure it with a pin and clip. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of about 14-3/4". If your vehicle's hitch height matches ours and your trailer's ride height matches this measurement this should be an appropriate ball mount for you. We can now flip the ball mount over to the rise position. more


Watch Video

8/30/2013 8:30:08 AM



  1